SteamCan GSX-HL – Gas Convection Steamer on a Cabinet Base

Used in Great condition.

GSX-16HL: Thirty-two 1″ pans, Sixteen 2.5″ pans, Eight 4″ pans, or Six 6″ pans

A convection steamer with an individual gas steam generator for each cavity. AGA/CGA and NSF Certified.

The steamer constructed of a satin finish stainless steel type 304.

The cooking chamber is a one piece all welded type 316 stainless steel with coved corners.

The heavy-duty door shall have an inner liner of stainless steel with a full perimeter gasket seal, an outer liner of one piece all welded stainless steel, and a positive lock and seal mechanism with spring release.

Each compartment provided with removable stainless steel pan supports. A stainless steel drip trough integrally connected to drain to collect condensate when the doors are opened.

The control housing constructed of stainless steel with a full access removable panel.

Each compartment have individual controls which include an illuminated three-way power switch (On/Off/De-lime), a pilot ready light, a pilot cooking light, an ignition light, a 60 minute electric timer which sounds an audible signal at the end of the cooking cycle, solid-state generator controls and electronic ignition for each generator. Steam flow to the cooking chamber shall be cut off when the door is opened and reactivated when the door is closed.

The steamer GSX-16HL) cabinet base constructed of #4 stainless steel with exterior hinged door and 6″(152mm) stainless steel legs with adjustable bullet feet on front and flanged on the rear.

$ Sold


Recent Posts